Raritan PMC-1000 - Configure Panel Branch Circuits

Power Meter Quick Setup Guid
e
17
QSG
-PMM-1A-v3.3.10-E  255-64-0004-00
Configure Panel Branch Circuits
1
In the Power Meters
page, click the panel.
The Panel details page
opens.
2
In the Panel Branch
Circuits section, click the
circuit position to open
the pop-up menu.
3
Click Create Circuit. The
Create Circuit dialog
opens.
5
Enter a name for the
circuit.
6
Select the circuit type:
One-Phase LN,
One-Phase LL,
One-Phase LLN, or
Three-Phase. Circuit
type cannot be changed
later.
7
Enter the current rating
of the circuit in Amps.
8
Enter the rating of the CT
connected at this circuit
position in Amps.
9
Click the Phase or CT# to
edit the automatic labels.
10
Click Create.