Chapter 3: Using the Web Interface
If set to Rack Units, the Z coordinate field in the peripheral device
settings only allows to enter numerical values. If set to
Free-form, any input is allowed. The label of the input field on
the peripheral device settings page will indicate which format is
expected.
3. Peripheral Device Auto Management: Select the checkbox to enable.
Selects whether newly plugged peripheral devices are automatically
assigned to an empty slot (if any is available).
4. Altitude: Set the altitude in meters for the differential air pressure
sensor.
5. Click Save.
Power Meters
To view or manage the connected panels and power meters, click Power
Meters in the menu.
The Power Meters page contains all configured power meters and panels,
allows you to scan for unconfigured meters, and gives access to all
configuration possibilities.
For help with configuring power meters and panels, see
Configuring
Power Meters and Branch Circuit Monitors
(on page 29).
To Next Page
Loading...
