Raritan PMC-1000 - Power Meter Management

Chapter 3: Using the Web Interface
100
6
State indicates if readings are normal, warning or
critical.
7
Click actions menu for more options.
Power Meter Management
This section introduces the operations for a power meter module. For
information on the power meter's sensor data, see
Viewing the Power
Meter Data (on page 99).
To access power meter management options:
• Click Power Meters in the menu, then select a power meter. In the
power meter details page, click the actions icon in the top right
corner.
The following options are available:
• Edit Thresholds: See Configure Thresholds (on page 106).
• Configure: You can edit some details of the power meter
configuration. See
Configure Power Meter (on page 31).
• Reset Active Energy: See below.
• Delete: Click Delete to delete this power meter.
To reset active energy:
Click Reset Active energy to reset the power meter's active energy to 0
(zero) Wh. Only users with the "Change PMC, PMB & PMM
Configuration" permission can reset active energy readings.
Tip: To reset all active energy readings simultaneously, see Resetting All
Active Energy. To reset a branch circuit's active energy, see Panel
Branch Circuits Operations (on page 105). To reset a panel's active
energy, see
Panel Mains Circuit Management (on page 104).