Chapter 3: Using the Web Interface
Readings for each phase.
Value contains the reading for the sensor.
State indicates if readings are normal, warning or critical.
Branch circuit details and readings.
Click a branch circuit to show the menu: Circuit Details to open
a new page. Or, delete a circuit.
Panel Branch Circuit Details page:
Click a configured circuit, then choose Circuit Details to open a new page
with panel branch circuits details. Similar to the panel details, the circuit
details displays readings at the circuit level.
Note: Branch circuit RMS voltage is the
minimum
of Line-Line or
Line-Neutral RMS voltage readings. NO alerts will be available for a
branch circuit's RMS voltage even when voltage thresholds are set for it.
Panel name and circuit name. Click the arrows to scroll
through the configured branch circuits.
Click actions menu for more options. See
Panel Branch
Circuits Operations
(on page 105).
Sensor list. This list may be filtered by the Select Readings
settings in the Panel Mains Circuit page.
Total readings for the whole circuit.
To Next Page
Loading...
