Chapter 3: Using the Web Interface
Asset Strip,
Raritan asset
strips,
LHX 20,
SHX 30,
LHX 40,
Power CIM
Force the BCM2 to show the selected device's
data/setup page regardless of the physical
connection status.
Note: 'LHX 20', 'SHX 30', and 'LHX 40' are not available when the support
of LHX/SHX heat exchangers is disabled. See
Miscellaneous
(on page
303).
Asset Strip
After connecting and detecting Raritan asset management strips (asset
strips), the BCM2 shows 'Asset Strip' in place of 'Feature Port' in the
menu.
Note: For connection instructions, see
Connecting Asset Management
Strips
(on page 66).
To open the Asset Strip page, click it in the Menu. On this page, you can
configure the rack units of asset strips and asset tags. A rack unit refers
to a tag port on the asset strips. The "Change Asset Strip Configuration"
permission is required.
For the functionality of this icon on the top-right corner, see
Feature
Port
(on page 134).
To configure asset strip and rack unit settings:
1. Click Edit Settings.
2. Make changes to the settings by directly typing a new value, or
clicking that field to select a different option.
To Next Page
Loading...
