Chapter 3: Using the Web Interface
saved on the BCM2 locally. If needed, download important snapshots
before rebooting the device.
To view saved snapshots:
1. Choose Webcams > . The Snapshots page
opens.
2. Click the snapshot you want to view from the list.
Tip: The date and time shown on the BCM2 web interface are
automatically converted to your computer's time zone. To avoid any
time confusion, you can apply the same time zone settings as those
of BCM2 to your computer.
3. The selected snapshot as well as its information, such as captured
time and resolution, is displayed on the same page.
4. If the latest saved snapshot is not listed yet, click .
To manually delete any snapshots:
1. Click to make checkboxes appear.
2. Select the checkboxes of the images you want to remove.
To Next Page
Loading...
