Timeout The interval of time, in seconds, after which a new
inform communication is resent if the first is not
received.
For example, resend a new inform
communication once every 3 seconds.
Number of Retries The number of times you want to resend the inform
communication if it fails.
For example, inform communications are
resent up to 5 times when the initial
communication fails.
Host The IP address of the device(s) you want to access.
This is the address to which notifications are sent
by the SNMP agent.
You can specify up to 3 SNMP destinations.
Port The port number used to access the device(s).
Community The SNMP community string to access the
device(s). The community is the group representing
the BCM2 and all SNMP management stations.
6. Click Save.
SNMPv3 Notifications
1. Choose Device Settings > Network Services > SNMP.
2. In the SNMP Agent, make sure the Enable SNMP v1/v2c checkbox is
selected.
To Next Page
Loading...
