Chapter 5: Using the Command Line Interface
• Without the parameter "details," only the default upper and lower
thresholds, deassertion hysteresis and assertion timeout settings of
the specified sensor type are displayed.
• With the parameter "details," the threshold range is displayed in
addition to default thresholds settings.
Security Settings
This command shows the security settings of the BCM2.
To show detailed information, add the parameter "details" to the end of
the command.
Displayed information:
• Without the parameter "details," the information including IP access
control, role-based access control, password policy, and HTTPS
encryption is displayed.
• With the parameter "details," more security information is displayed,
such as user blocking time, user idle timeout and front panel
permissions (if supported by your model).
To Next Page
Loading...
