Raritan PMC-1000 - Command History; Reliability Data; Reliability Error Log; Examples

Chapter 5: Using the Command Line Interface
381
Command History
This command shows the command history for current connection
session.
#
show history
Displayed information:
• A list of commands that were previously entered in the current
session is displayed.
Reliability Data
This command shows the reliability data.
#
show reliability data
Reliability Error Log
This command shows the reliability error log.
#
show reliability errorlog <n>
Variables:
• <n> is one of the options:
0 (zero) or any other integer number.
Option
Description
0 Displays all entries in the reliability error log.
Tip: You can also type the command without
adding this option "0" to get all data.
A specific
integer number
Displays the specified number of last entries in the
reliability error log.
Examples
This section provides examples of the show command.