Chapter 5: Using the Command Line Interface
Example 3 - Basic PDU Information
The diagram shows the output of the
show pdu
command.
Example 4 - In-Depth PDU Information
More information is displayed when typing the
show pdu details
command. Displayed information varies depending on the model you
purchased.
Clearing Information
You can use the clear commands to remove unnecessary data from the
BCM2.
After typing a "clear" command, press Enter to execute it.
Note: Depending on your login name, the # prompt may be replaced by
the > prompt. See
Different CLI Modes and Prompts
(on page 359).
To Next Page
Loading...
