Raritan PMC-1000 - Page 50

Chapter 1: Installation and Initial Configuration
38
 The top and bottom bars on the LCD display may be yellow or red,
depending on the type(s) of available alerts. See
Operating the
Dot-Matrix LCD Display (on page 36).
Number
Description
Sensor names.
Sensor readings and/or states.
A numeric sensor shows both the reading and state. A state sensor or
actuator shows the state only.
Available states are listed below. For further information, see
Sensor/Actuator States
(on page 123).
 Alarmed
 Lower Critical = below lower critical
 Lower Warning = below lower warning
 Upper Warning = above upper warning
 Upper Critical = above upper critical
 Open (for overcurrent protectors)
3. Press or to view additional pages. When there are
multiple pages, page numbers appear in the top-right corner of the
display.