Raritan PMC-1000 - Page 511

Chapter 5: Using the Command Line Interface
499
Naming a Rack Unit
This command syntax assigns or changes the name of the specified rack
unit on the specified asset strip.
config:#
rackUnit <n> <rack_unit> name "<name>"
Variables:
• <n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the BCM2 device with only one
FEATURE port, the number is always 1.
• <rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the
web interface.
• <name> is a string comprising up to 64 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
Setting the LED Operation Mode
This command syntax determines whether a specific rack unit on the
specified asset strip follows the global LED color settings.
config:#
rackUnit <n> <rack_unit> LEDOperationMode <mode>
Variables:
• <n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the BCM2 device with only one
FEATURE port, the number is always 1.
• <rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the
web interface.
• <mode> is one of the LED modes:
automatic or manual .
Mode
Description
automatic This option makes the LED of the specified rack
unit follow the global LED color settings. See
Setting LED Colors for Connected Tags
(on page
498) and
Setting LED Colors for Disconnected
Tags
(on page 498).
This is the default.