Raritan PMC-1000 - AD-Related Configuration

Appendix D: RADIUS Configuration Illustration
567
VENDOR Raritan 13742
BEGIN-VENDOR Raritan
ATTRIBUTE Raritan-User-Roles 26 string
END-VENDOR Raritan
Step B -- create a user profile for "steve" in FreeRADIUS:
1. Go to this location: /etc/raddb/users.
2. Add the data of the user "steve" by typing the following. Note that the
values after the equal sign (=) must be enclosed in double quotes (").
steve Cleartext-Password := "test123"
Raritan-PDU-User-Roles = "Raritan:G{Admin User SystemTester}"
AD-Related Configuration
When RADIUS authentication is intended, make sure you also configure
the following settings related to Microsoft Active Directory (AD):
• Register the NPS server in AD
• Configure remote access permission for users in AD
The NPS server is registered in AD only when NPS is configured for the
FIRST time and user accounts are created in AD.
If CHAP authentication is used, you must enable the following feature for
user accounts created in AD:
• Store password using reversible encryption
Important: Reset the user password if the password is set before you
enable the "Store password using reversible encryption" feature.
To register NPS:
1. Open the NPS console.