RAS 74.40 - 2.5. OCCUPATIONAL SAFETY DIRECTIVES

SAFETY
2.5. OCCUPATTONAL
SAFETY
DIRECTIVES
1. Any
method
of
working
which
detrimentally
affects
safety
on the machine
must
be
prohibited
(refer to
the
following
items).
2.
The
machine
may
only
be operated
by
qualified,
authorized
personnel
who
have read
and understood
this operating
manual.
5. The
operator
is obliged
to
check
the
machine
for
obvious
damage
and faults
at least
once
during
a shift
and
to report
any
changes
to the machine
-
which
affect
safety
-
to his
superior
immediately.
J.
4.
The
operator
shares
the responsibility
of ensuring
that
no
unauthorized
personnel
work
on
the
machine.
6. The user
shall undertake
to
always
operate
the
machine
in
imnnculale
condition
only
Electrical hazards
-
misuse
or
incorrect
installation
work
on
the machine
can lead
to an
electric
shock,
damage
or
death.
lnstatlation
work
must
comply
with
the
"National
Electric
Code"
(Article 250
-
grounding
etc.).
The operator
may
only activate
and
operate the
machine
after
he has
been
suitably
trained
and
has
read and
understood
the
operating
manual.
Work
may
only
be carried
out
on the
electrical
installation
of
the
machine
by
an authorized
electrician.
Before
connecting
the
machine,
check
that the
operating
voltage
and
No
safety
devices
may
be removed
or disabled.
The
upper
cheek,
bending
cheek
and rear
stop may
constitute
a
danger
to life
and
limb.
7
8.
9.
RAS 74.20-40
MULTIBEND 9OOO
2-4
S€ptomber
7, 1993