RAS MULTIBEND 9000 - 2.4 Safety-Conscious Operation

R A s
SAFETY
2.4.
SAFETY.CONSCIOUS
OPERATION
-
The machine may
only be operated by
qualified,
authorized operators, who
have been
trained
by their
superiors.
-
The areas of responsibility for
machine operation must be clearly
defined and maintained
to ensure that there are no conflicts
of authority as far as safety
aspects are concerned.
This applies, in
particular,
to work
on electric, hydraulic and
pneunnlic
equipment, which
may only be canied out by
qualitied
specialisls.
The
machine
must
always be
disconnected from the
mains
prior
to
commencing
installation, commissioning,
operation,
conversion,
adaptation, maintenance and
repair
work.
For
this, the main switch on the switchgear
cabinet
must be
turned
off
(position
0) and secured with
a
padlock.
The mem-
ber of staff responsible for
the work must take
possession
of
the key.
The
main switch must be turned otf and secured
with a
padlock prior
to working inside the switchgear cabinet.
Furthermore,
the main electric supply line
from the mains to
the switchgear
cabinet must be disconnected. Care
must be
taken
to ensurethatthe main supply line
cannot be connected
during work. Before
starting work, the responsible
member
of staff
must satisty himself that the supply
line really is dead
by means of a
measuring instrument.
RAS 74.20-40
MULTIBEND
9OOO
SeptamberT,1993
2-3