RAS MULTIBEND 9000 - Page 57

MAINTENANCE
7. Clean the lubricating nipple before applying the
grease gun,
then
grease
8.
Apply a
film
of
oil or
grease
to all blank metal rnachine components
at regular intervals
to
prevent
corrosion damage.
9. Replace faulty
pails
in
good
time in order to avoid more serious damage.
10.
Replacement assemblies have the same maintenance schedules
as
the
units which they
are
replacing.
11
Replace all
protective
devices
properly
after maintenance
work has been completed.
12. Observe the
environmental
protection
regulations when dis-
posing
of oil,
grease,
cleaning agents
or components con-
taining oil
(e.9.
oil filters).
ATTENTION!
13.
Service
and
repair
work may
only be carried out by authorized
personnel.
RAS 74.2G40
MULTIBEND
9OOO
L
September
7,
1993 4-9