RAS MULTIBEND 9000 - 5. Electrical Equipment; 5.1 Safety Directives

RAS
ELEU I F{IUAL EtdUII'MtrN I
5. ELECTRICAL
EQUIPMENT
ATTENTION!
5.1.
SAFETY
DIRECTIVES
.t.
Also
refer
to the separate "CNC-COLOURGRAPHIC-CON-
TROLLER MULTIBEND
9000" for RAS 74.20-40.
2.
Work on the
electrical installation
of the machine
may only
be carried out by an authorized
electrician.
Electrical
hazard
-
misuse
or incompetent installation
work
carried out on the machine
may lead to electric
shocks, injury
or death.
The
instaltation must comply
with the "National
Electric
Code"
(Article
250
-
ground
etc.).
The
machine must not
be connected
to the electric system
or
operated before this
operating manual
has been read
and
understood,
pafticularly
Chapter
2 "SAFETY".
The
separate "CNC-COLOURGRAPHIC-CONTROLLER
MUL-
TIBEND
9000"
operating
instructions
must
also have
been
read and understood beforehand.
The
separate
"SIEMENS safety
information", supplied
with
the machine,
must also have
been read and
understood
beforehand.
RAS 74.20-40
MULTIBEND 9OOO
Septembel
7,
1993 5-1