RAS MULTIBEND 9000 - Page 92

AUXILIARY
EQUIPMENT
The
key
for
this
key lock
switch
can be withdrawn
in
every
position
for safety
rsasons to
ensure that
unauthorized mem-
bers
of staff
cannot alter
the setting.
The foreman
or super-
visor,
responsible
for the machine
operators, must
always
take
possession
of the key.
Activate
two-person
control by tuming and
pulling
ofi the key lock
switch.
Two-person
control mode
has
been
activated
when the
associated
pilot
lamp lights
up.
To
close the
upper
check when two-person
control is active,
both operators must
press
the
left-hand
"Close
upper cheel('
pedal
within
3 seconds for
safety reasons.
The
upper
cheek comes
to an immediate
standstill
if one of the two
pedals
is released.
Open
the
upper cheek
by
pressing
one
of the two
foot
pedals
"Open
upper cheek".
Both
of lhe
right-hand
"Automatic
start"
pedals
must be
pressed
simultaneously
for a shod
period
to start
the
automatic bending
sequence.
The movement
of the bending
cheekcan
be interrupted
by
pressing
one of the
central
"Emergency
stop"
pedals.
RAS 74.20-40
MIII TIBtrND
qNOO
7-2
Juni
9, 1994