lnAsl
'v
AUXILIARY
EQUIPMENT
Caution:
Hold tools securely and do not drop them.
Other tools can be
pushed
into the holding
rail
towards
the
roar.
At
least two tools
(two
grid
pieces
or two corner
pieces)
must be fitted in the upper cheek, whereby
it is necessary to
guarantee
lhat at least one
tool is in the left half and
one
is in the right half.
ATTENTION!
The tools
must
all be
firmly
pushed
in towards the rear,
so
that
they all
securely
rest against their support surfaces.
When
you
have ensured that alltools are securely fitted,
you
can switch on
the main
switch and the control at the key-
operated switch.
The
tools are simultaneously clamped. The
upper cheek
must then be
opened
slightly. To
do
this,
press
the left foot
pedal
lirmly
downwards as
quickly
as
possible
beyond
the
pressure point
into
the
"Upper cheek open"
position
so that
the
upper cheek opens slightly fufther
(see
Section
5.2). The
hardwood
supports inseded to
secure
the
upper
cheek
must then be removed again. The machine is
ready for operation again.
,.,
RAS 74.20-40
MULTIBEND
9OOO
t.
I
I
S€ptomb€r
7, 1
993 7-7
To Next Page
Loading...