Rath 2100-LTEGSM4 - Command Center System Wiring Diagram

Page 8
Command Center System Wiring Diagram:
Command
Center
120 Volt Power Connection
to Incoming 120 Volt
1 Wire Pair (22/24 ga.)
Distribution
Module
Cellular
Gateway
Power Supply
with UPS
Antenna
Note: If using own RJ11 jack,
use center pins only.
Power Cord
Connection
(Provided)
Two Wire
Connection
Two Wire
Connection
Two Wire
Connection
Two Wire
Connection
Twisted, Shielded
Wire Recommended
Single
Pair
Single Pair