|18|
1. Add one package of cleaning powder to a clean pouring vessel, then add about 40oz/1.3L of warm, not
hot, water to dilute.
2. Pour into the Ratio water tank. Top up with more water to the fill line.
3. Brew one complete cycle.
4. Rinse all components. Repeat brew cycle three times with clean water.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact
with skin, wash immediately with plenty of water. If swallowed, seek medical advice immediately and show
the container or label.
05 CLEANING
To Next Page
Loading...
