3 | Product description
12 / 64 80.06.243_iVarioProL-iVarioProXL_IM_en-US
3 Product description
3.1 Device description
NOTE
Never seal or pipe the safety overflow
Do not reduce the cross-section of the safety overflow.
The safety overflow but be accessible and clear at all times. It is used for
ventilation and as a drain in the event of blockages.
1 Safety overflow with sieve (no
connection)
6 Ethernet network connection
2 Waste water connection 7 PG screw fittings for optional con-
nections
3 Hot water connection (optional) 8
4 Cold water connection 9
5 Power cable guide 10
3.2 Technical data
Protection class
The device corresponds to jet water connection class IPX5.
Ambient conditions for operation
n
Do not set up the device in ambient temperatures below 5 °C [41 °F].
To Next Page
Loading...
