4 | Transport
22 / 64 80.06.243_iVarioProL-iVarioProXL_IM_en-US
7. When setting up the unit without a base, remove the transport feet before
setup.
>> The unit is set down on the designated installation surface and ready for
setup and installation.
4.3 Transport with pallet
CAUTION
Inclined plane during transport using transport aid
Risk of crushing and injury during transport using a transport aid over an
incline or uneven floor.
n
Do not run over an incline of more than 10°.
n
Take care when transporting the device.
a The packaging material is removed.
a The lift truck is in the lowest position.
1. Place the transport aid on the electrical compartment side.
2. Transport the device to the installation site with the transport aid.
3. Lift the device on the lifting points and place it on the designated installa-
tion surface.
>> The device is set down on the designated installation surface and ready for
setup and installation.
To Next Page
Loading...
