6 | Electrical connection
80.06.243_iVarioProL-iVarioProXL_IM_en-US 41 / 64
1. Insert the control panel at the front (1) and press in the control panel at the
back (2) until it engages.
> The cover is fitted flush on the electrical compartment frame at all points.
2. Screw in the 2 screws behind the cover of the front of the device.
>> The electrical compartment is closed and protected against water and mois-
ture penetration.
6.7 Connected loads of different voltage types
Maximum connection voltage
n
Maximum permissible tolerance for the input voltage: - 10% to 10%
To Next Page
Loading...
