11 | Options
80.06.243_iVarioProL-iVarioProXL_IM_en-US 55 / 64
Connect the connections in accordance with the specifications again once the
work is complete.
When the device is in its original position again, ensure that it is horizontal.
Apply the locking brake.
a The roller kit is on hand.
1. Unscrew the plastic feet on the relevant side.
2. Lift the device on one side each time.
3. Screw the roller with the locking brake on to the front side of the device and
the roller without the locking brake on the rear side of the device.
>> The rollers are screwed on to the device.
Item number: Kit with 4 rollers 60.71.267
Securing the device with rollers against slipping
NOTE
Damage to the connections can occur during movement
Secure the unit additionally against movement with a chain on the rear panel.
The chain is not included in the scope of supply.
1. There are holes for fixing the chain or rope on the rear side of the device.
2. Hook the chain into the holes and a fitting on the wall.
3. Also apply the locking brake.
>> The device is secured against rolling away and fixed in place.
To Next Page
Loading...
