1 | Introduction
80.06.231_iVarioProL-iVarioProXL_IM_en-GB 7 / 72
1.5 Liability and warranty provisions
Liability
Installations and repairs not carried out by professionals authorised by the man-
ufacturer or not using original service parts, and technical modifications to the
unit, which are not approved by the manufacturer, may void the manufacturer’s
product liability.
Warranty
Damage occurring as a result of non-compliance with this installation manual is
excluded from the warranty.
The following are also excluded from the warranty:
n
Damage resulting from improper use, installation, maintenance or repair
n
Use of the unit for purposes other than those for which it is intended
n
Modifications or technical alterations to the unit not authorised by the man-
ufacturer
n
Use of non manufacturer-original service parts
1.6 Identification of the unit
Type plate
The type plate is located on the basic frame of the unit between the pan and
electrical compartment.
To Next Page
Loading...
