4 | Transport
80.06.243_iVarioProL-iVarioProXL_IM_en-US 21 / 64
2. If necessary, cut out perforated points in the box to enable the device to be
pushed off the pallet.
3. Lift the unit on the left side.
4. Pull the unit along the foot guides in the box to the end and set down the
left side of the unit.
5. Lift the unit on the right side and remove the pallet.
> The transport pallet is removed.
6. Lift the unit on the lifting points and transport it to the designated installa-
tion surface.
To Next Page
Loading...
