11 | Options
54 / 64 80.06.243_iVarioProL-iVarioProXL_IM_en-US
11 Options
11.1 Setup options
Unit with stainless steel feet
The stainless steel feet can be raised by rotating them and fixed to the ground
through the holes. The adjustment range is +/- 10 mm [3/8 inch].
150 mm
[6 Inch]
+/- 10 mm
[3/8 Inch]
Item number: Kit with 4 stainless steel feet 60.74.500
Fixing the device with stainless steel feet
The device can be fixed to the ground with dowels and screws or by gluing
with a special adhesive.
Device with rollers
The device is delivered with plastic feet.
CAUTION
Device rolls away due to uneven ground
Risk of crushing and injury if the device rolls away.
n
Apply the locking brake.
n
Do not set up the device on uneven ground.
NOTE
Damage to the connections can occur during movement
Disconnect all connections when moving the device.
To Next Page
Loading...
