- 25 -
SelfCooking Control
®
Mode – Operation
Example 5: Rice
Select Side Dishes
Select „steamed rice“ – that’s it!
The unit right away works with preset, factory-
tested settings.
Or you have the option of making individual
changes to the time.
If desired the default settings can be changed
within the fi rst 60 seconds.
Please note that the core temperature probe
must be inserted into the container of rice when
requested!
If the core temperature probe is not inserted or
incorrectly inserted (see chapter on working with
Core Temperature Probe) the buzzer sounds and you
see an appropriate message on the display:
The cooking process continues once the probe
position has been corrected.
Note:
You can store your entries under an individual name
(see Programming chapter)
Note:
The requisite cooking time is displayed once the
cooking time is up and the cooking cabinet doors
have been opened.
Discontinuing an operation in SelfCooking
Control
®
Mode
An operation in SelfCooking Control
®
Mode may be
discontinued while the display shows the „back“
symbol. As soon as the „back“ symbol goes out the
only way of halting the process is by switching the
appliance off,
or
After the door has been open for some time
appears again so that the cooking process can be
deselected.
1
3
steamed
vegetables
grilled
vegetables
steamed
rice
fried
rice
noodles with
sauce
steamed
rice
short lang
load
2
convenience
roasted
To Next Page
Loading...
