- 65 -
Manual cleaning
Close unit door, cleaning starts automatically.
Follow the appliance menu prompt.
The cleaning time is shown on the display.
When „rinse“ request appears, please
thoroughly rinse grid rack, mobile oven rack,
cooking cabinet and the area behind the air
baffl e with the hand shower.
Insert air baffl e and grid shelf and lock
properly. Insert cable for the core temperature
probe into the holding tabs on the air baffl e.
Wipe down cooking cabinet door and door
seal with a damp cloth.
Close cooking cabinet door.
To dry the cooking cabinet „Hot air“
operating mode is automatically switched
on for 10 minutes after the cabinet door is
closed.
By selecting an operating mode you leave the
cleaning program.
Attention:
• To stop the high-quality nickel-chromium
steel corroding, your unit must be cleaned
regularly, even if it is only operated in
“Moist Heat” mode.
• Leave the appliance door slightly open if it is
going to be idle for a prolonged period (e.g.
overnight).
• Cleaning the cooking cabinet seal will extend the
service life. Use a soft cloth and cleaning agent
to clean the cooking cabinet seal. Do not use
scouring products.
• Clean the glass windows on the inside and out
and the outer panels of the unit, ideally using a
soft, damp cloth. Do not use a scouring product.
• To stop the high-quality chrome nickel steel
corroding, your appliance must be cleaned
regularly, even if it is only operated at „Moist
Heat“.
• If there is heavy soiling let the residues soften for
10 minutes in „Moist Heat“ mode before
cleaning.
• Do not treat unit with acids or expose to acid
fumes – this will damage the protective layer
of stainless steel and may cause the fi nish to
discolour.
• Do not use high pressure cleaners.
• Rinse the spray pistol nozzle and nozzle
extension with clear water after every use.
• Rinse the cleaning bottle with warm water after
use.
• A couple of drops of salad oil will clear any
stiffness in the pump plunger.
You need:
Spray pistol – Article no.: 6004.0100
8
To Next Page
Loading...
