Interrupting the CleanJet
®
-
Program:
After a power failure or after the unit is switched
off the display shows
If Interrupt CleanJet
®
is not confirmed within 20
seconds by pressing the display or the central dial,
the program continues uninterrupted to the end.
If Interrupt CleanJet
®
is selected:
1
2
The display asks you to remove the Cleaner and
Rinse Aid tablets (if still there).
Caution!
• Always wear gloves when handling
Cleaner and Rinse Aid tablets – danger of
corrosive burns!
3 Close the cooking cabinet door.
This display will remain for 10 sec. even if the
cabinet door is opened, then there will be
another request to close the cooking cabinet
door.
Unit being rinsed, the display shows:
Once rinsing has finished the display shows
Caution!
Thoroughly flush away Cleaner and Rinse
Aid residues with hand shower.
Your unit is ready for cooking again.
cleaning incomplete
Interrupt Cleanjet
close door
remove tabs
Interrupt Cleanjet
Interrupt Cleanjet
- 45 -
Functions – CleanJet
®
/Interrupt CleanJet
®
To Next Page
Loading...
