Rational SelfCooking Center - Appliance Options

Draft diverter (gas appliances only)
Exhaust gas pipe diameter: 180 mm
Model 6 x 1/1 GN Art no. 70.00.356
Model 6 x 2/1 GN Art no. 70.00.359
Model 10 x 1/1 GNArt no. 70.00.348
Model 10 x 2/1 GNArt no. 70.00.349
Model 20 x 1/1 GNArt no. 70.00.352
Model 20 x 2/1 GNArt no. 70.00.343
UltraVent
®
condensation hood
The patented condensation technology used in the
UltraVent
®
condensation hood totally absorbs steam in
enclosed areas and discharges it through the integral
exhaust system. Vapour is automatically fan-extracted,
even when the cabinet door is open. Significantly redu-
ces unpleasant cooking smells. No ventilation system
needed. Easy to install and retrofit.
Model 6 x 1/1; 10x1/1 GN E Art. no. 60.70.366
Model 6 x 1/1; 10x1/1 GN G Art. no. 60.70.370
Model 6 x 2/1; 10x2/1 GN E Art. no. 60.70.366
Model 20 x 1/1 GN E Art. no. 60.70.374
Condensation extractor hood for
table-top units
Vapour is automatically fan-extracted when the
cabinet door is opened (no condensation enginee-
ring). Easy to install and retrofit.
Model 6 x 1/1; 10 x 1/1 GN E Art. no. 60.70.366
Model 6 x 1/1; 10 x 1/1 GN G Art. no. 60.70.364
Model 6 x 2/1; 10 x 2/1 GN E Art. no. 60.70.408
Access ramp for 20 x 1/1
and 20 x 2/1 GN
SLevels out unevenness in the kitchen floor to a
maximum of 20 mm in the direction of insertion.
Levels out unevenness in the kitchen floor
(crosswise) to a maximum of 12 mm in the direc-
tion of insertion.
Model 20 x 1/1 GN Art. no. 60.21.164
Model 20 x 2/1 GN Art. no. 60.22.086
- 67 -
Appliance options
Info