MySCC - Settings
113 / 203
With the door open
Here you can select the behaviour of the LED lighting when the door is open.
The LED lighting features two LED strips. One LED strip is installed in the left side of the
door and the other on the right.
Press the With open door button and select between the three settings by
turning the central dial.
LED lighting
on the door
handle
side ON
If you enable this setting, the LED strip on the handle side (default setting: the left
side of the door when facing the appliance) continues to light as soon as the door
is opened. The LEDs illuminate the cooking chamber.
The opposite LED strip switches off as soon as the door is opened.
LED door
lighting OFF
If you enable this setting, both LED strips are switched off as soon as the door is
opened.
LED door
lighting
switches off
after 30 sec
If you enable this setting, the LED strip on the handle side (default setting: the
left side of the door when facing the appliance) switches off after 30 seconds as
soon as the door is opened.
The opposite LED strip switches off as soon as the door is opened.
To Next Page
Loading...
