Rational SelfCookingCenter series - Domestic Technology: Component Replacement; Replacing the Door Seal; Replacing Lamps

Domestic technology
189 / 203
Replacing the door seal
The door seal is fitted in a groove on the cooking
chamber.
- Remove the old seal from the groove.
- Clean the groove rail.
- Insert new seal into the groove (moisten the
retaining lips with soapy water).
- The rectangular part of the seal must be seated fully
in the holding frame.
Cooking chamber seal:
6 x 2/3 GN No.: 20.02.549
6 x 1/1 GN No.: 20.02.550
6 x 2/1 GN No.: 20.02.551
10 x 1/1 GN No.: 20.02.552
10 x 2/1 GN No.: 20.02.553
Replacing the lamps
LED lighting
To replace the LED lighting, please contact your authorised RATIONAL Service Partner
Halogen lamp
First switch off the appliance at the mains.
- Cover the appliance drain in the cooking chamber.
- Remove the frame with glass and seal.
- Replace halogen bulb (no.: 3024.0201), do not
touch the bulb with your hands).
- Replace sealing frame as well (no.: 40.00.094).
- Remove the frame with glass and seals.