12
forget to let the device cool down.
21. Do not use the device in dusty rooms.
a. Store it in a clean and dry place.
22. The device is designed for indoor use only. It cannot be used or
stored in places exposed to weather factors.
23. Its place of operation should provide stability. The power cord
cannot run in the vicinity of hot air outlets. It cannot be bent or
crushed or run in the neighborhood of sharp edges.
24. Do not insert any objects into the opening of the device's body.
25. Despite proper use of the device and following all safety
guidelines, some specific residual risks cannot be completely
eliminated.
26. It must be possible to unplug the device after it is installed;
access to the plug must be provided.
27. Do not use glue to fix the device. Gluing is not considered a
reliable fastening method.
28. WARNING: Before switching the device on, make sure that the
power characteristics comply with the parameters on the
nameplate. This heater is equipped with a grounded type plug and
must be plugged into a grounded type outlet. This is a safety
feature: DO NOT REPLACE THIS PLUG!
PURPOSE
The device is intended for use in domestic or similar environments, such as:
- offices and other working environments
- use by clients in hotels, motels and other residential environments
SPECYFICATIONS
*Models CH-2000MT and CH-2000RT with additional airflow TURBO
Model CH-2000M/ CH-2000R CH-2000MT*/ CH-2000RT*
Nominal power consumption 1800 - 2000W 1800 - 2000W
Maximum power 2000W 2000W
Heating power setting 750W, 1250W 750W, 1250W
Additional airflow TURBO* - +
Nominal voltage 220-240V, AC 220-240V, AC
Nominal frequency 50Hz 50Hz
To Next Page
Loading...
