SPECYFICATIONS
*Models CH-9000WT and CH-9000BT with additional airflow TURBO
CONSTRUCTION
ASSEMBLY FOR FLOOR
Before using the heater, attach the feet (included separately in the gift box) to the unit.
Attach to the base of the heater using the 4 tapping screws provided, taking care to ensure that they are located correctly in
the bottom ends of the heater (see below).
The perfect place for the device is places where draughts are possible, such as near windows, in hallways, etc.
The device should be placed on a level and stable surface.
Model CH-9000W/ CH-9000B CH-9000WT*/ CH-9000BT*
Nominal power consumption 1800 - 2000W 1800 - 2000W
Maximum power 2000W 2000W
Heating power setting 750W, 1250W 750W, 1250W
Additional airflow TURBO* - +
Nominal voltage 220-240V, AC 220-240V, AC
Nominal frequency 50Hz 50Hz
To Next Page
Loading...
