Attention! Do not use sharp metal kitchen utensils. This may lead to damaging the plate.
First actuation
• Plug the waffle iron to the power source
• Set the thermostat to the maximum value
• Cover the heating plates with vegetable oil.
• Close the cover and leave the appliance turned on for 30 minutes
• Pour the dough in and prepare the waffles.
• After preparing the first two waffles dispose of them, turn the appliance off, leave until the
temperature falls and clean it.
• Next, the appliance may be again plugged in to the power source, greased with oil and used for
making waffles.
• Before pouring in the dough wait around 15 minutes - time for preliminary heating of the plates.
• Bake waffles around 2-3 minutes in a temperature of around 220
o
C. Check the quality of the first
waffles in order to possibly introduce changes of temperature and time settings.
ATTENTION Do not remove waffles from the waffle iron with your bare hands. In order to do it use a fork or a
spatula, taking care to avoid damaging the surface of the heating plates.
After finishing the preparation of the waffles the set the appliance’s thermostat in the maximum position in
order to burn out the remaining dough. Leave the appliance to cool and clean it.
WARNING! Accessible surfaces may become hot during use. Do not touch.
Cleaning and care
Clean the appliance after each use.
For cleaning the appliance use a soft and damp (not wet) cloth and a delicate cleaning agent. For cleaning
surfaces in contact with food use a cleaning agent provided for such surfaces. Follow the guidelines of the
cleaning agent’s manufacturer. Do not use solvents, gasoline and other agents which may damage the
appliance. Do not use elements which may damage the heating surface (wire cleaners, scrubbing cleaning
agents).
Troubleshooting
Disconnect from the mains and contact authorized service centre for possible repair.
Transportation and storage
Before putting the device away, wait until it cools down. Keep and store in a package protecting from humidity
and mechanical damages. Keep away from children.
The symbol presented below indicates that the used equipment cannot be placed together with
other household waste. The user is obliged to bring this item to the waste electrical and
electronic equipment collection point where a suitable system is created to allow safe disposal
of these items.
Dangerous components present in electrical and electronic equipment have negative consequences for the
environment and human health therefore correct handling of the equipment is very important. Certain
substances which may adversely affect the environment over the life of the product and after use have been
limited in this device.
To Next Page
Loading...
Need help?
General