22. The appliance should only be used for private use, as intended for the appliance. This appliance is not
intended for commercial use.
23. Before assembly and disassembly of the sieve, always make sure that the juicer is disconnected from
its power source.
Do not cover the fan protection grid.
Do not put anything into the protection grid when the fan is on.
Parts
Please check the fan is complete after you open the packaging.
Check if the components are not damaged.
1. Screw the blade cover 6 to the front grid 5 (figure 1)
(Figure 1)
1 Drive unit 2 Back grid
3 Nut 4 Blade
5 Front grid 6 Blade cover
7 Screws fixing blade cover 8 Basket fixing bolt
To Next Page
Loading...
Need help?
General
