EasyManua.ls Logo

Raven AutoBoom - Install Left and Right Cylinder Hoses

Default Icon
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Manual No. 016-0230-004 Rev. F 61
UltraGlide
4. If the machine’s pressure hose end is 11/16”, install a 13/16” ORFS (F) to 11/16” ORFS (M) reducer fitting
(P/N 333-0012-115) in the straight end of the installed tee fitting.
5. Connect the machine’s pressure hose to the straight end of the installed tee fitting.
6. Install a 13/16” ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the 90° end of the installed tee
fitting.
7. Install the straight end of the supplied hydraulic hose (P/N 214-1000-301) on the fitting installed on the 90°
end of the tee fitting.
8. Connect the 45° end of the installed hydraulic hose to the fittings installed in Port P of the AutoBoom valve.
9. Locate and disconnect the tank hose from the right side of the machine’s hydraulic valve.
10. Install a 13/16” ORFS M/M/F swivel run tee fitting (P/N 333-0012-028) in the tank port of the machine’s
hydraulic valve.
11. Connect the machine’s tank hose to the opposite end of the installed tee fitting.
12. Install a 13/16” ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on the 90° end of the installed tee
fitting.
13. Install the straight end of the supplied hydraulic hose (P/N 214-1000-301) on the fitting installed on the 90°
end of the tee fitting.
14. Connect the 45° end of the installed hydraulic hose to the fittings installed in Port T of the AutoBoom valve.
Install Left and Right Cylinder Hoses
FIGURE 6. Left Cylinder Hose Installed on Accumulator
1. Disconnect the machine’s hose from the left tilt cylinder accumulator.
2. Install a 13/16” ORFS (F) to 11/16” ORFS (M) reducer (P/N 333-0012-115) on the accumulator.
3. Connect a 9/16” SAE O-ring (M) to 11/16” ORFS swivel straight adapter fitting (P/N 333-0012-081) to the
9/16” SAE O-ring (F) to 9/16” SAE O-ring (F) ball valve (P/N 334-0003-036).
4. Connect the ball valve and fitting assembly to the installed reducer fitting.
5. Connect the 13/16” ORFS (M) to 9/16” SAE O-ring (M) straight adapter fitting (P/N 333-0012-082) to the
installed ball valve.
P/N 333-0012-115
P/N 333-0012-081
P/N 334-0003-036
P/N 333-0012-082
P/N 333-0012-028
P/N 214-1000-299
Accumulator
Machine’s Hose

Table of Contents

Other manuals for Raven AutoBoom

Related product manuals