P/N 016-0171-493 Rev. I 129
Tools Menu
7
Select Satellite
Use the scroll list to select the region in which the field computer will be operating. This is necessary to ensure
that the receiver utilizes corrections appropriate for the area in which the receiver is operating. A satellite
selection guide is available on the OmniSTAR web site:
www.omnistar.com
Satellite GS
If the Satellite GS correction service is selected for differential corrections, the Differential screen will display
subscription status information and the regional satellite currently selected for corrections.
Subscription Status
The subscription status area displays the following subscription information when available:
Note: If SmarTrax is connected to the Envizio Pro field computer, the operator must set the correction
source to “Internal” before the following information will be available. Be sure to move the vehicle
to a location with a clear view of the sky before contacting a local Raven dealer for subscription
assistance.
Expiration. The time until the current subscription will expire is displayed in days and hours. Contact a local
Raven dealer for subscription information.
Mode. This field will display whether the GS subscription is enabled or disabled. The mode must display
Enabled to allow Satellite GS corrections during field operations.
PAC Code. The PAC Code is required for registration with the Satellite GS correction service.
Select Satellite
Use the scroll list to select the region in which the field computer will be operating. This is necessary to ensure
that the receiver utilizes corrections appropriate for the area in which the receiver is operating. A satellite
selection guide is available at the Raven web site:
www.ravenhelp.com
To Next Page
Loading...
