13
AC Circuit Breaker
The overload current will automatically switch the circuit breaker OFF
to avoid short circuiting or overload. If the circuit breaker is switched
OFF automatically, check the load before switching the circuit breaker
back to ON.
Ground Terminal
The ground terminal is used to ground the entire generator.
Oil Alert System
The oil alert system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. When the oil level in the
crankcase falls below the safe operating limit, the oil alert system will
aut
omatically shut off the engine (even though the generator switch
still remains in the ON position), so that the engine can't be damaged
due to the insufficient amount of oil.
ON
OFF
AC CIRCUIT BREAKER
To Next Page
Loading...