Raven Hawkeye 2 - Introduction; Make and Model Compatibility

CHAPTER
2
Introduction: Make and Model Compatibility 5
CHAPTER 2 INTRODUCTION
MAKE AND MODEL COMPATIBILITY
Hawkeye® 2 is a pressure-based product control system which allows for precise sprayer application over a range
of conditions and reduced spray drift. Each nozzle is controlled by an individual pulsing valve giving you a
consistent spray pattern as speed and conditions change.
Hawkeye® 2 is built on the ISOBUS communication platform which allows the system to work with most ISO
Universal Terminals (UTs) and task controllers, including the Viper® 4.
This manual is intended to provide installation instructions on the following equipment:
TABLE 1.
Compatible Equipment Information
Make and Model
Nozzle Body
Type
Nozzle
Spacing
Boom
Type
Boom
Width
Kit Number
Model Year 17 & 18:
720
730
840
1020
1025
1030
1040
1220
1230
1240
TeeJet
15”
Standard
60’/90’ 117-2005-178
90’ 117-2005-180
100’ 117-2005-182
Pommier
100’ 117-2005-184
120’ 117-2005-186
132’ N/A
20”
Standard
60’/90’ 117-2005-179
90’ 117-2005-181
100’ 117-2005-183
Pommier
100’ 117-2005-185
120’ 117-2005-187
132’ 117-2005-189