Raven Hawkeye - TABLE 3. Nozzle Control Valve Seal Replacement Kit Components; 1.; 2.; 3.

APPENDIX D
94 Hawkeye Nozzle Control Operation Manual
TABLE 3. Nozzle Control Valve Seal Replacement Kit Components
FIGURE 1. Seal Replacement Kits and Valve Body Assembly
NOZZLE CONTROL VALVE MAINTENANCE PROCEDURE
Hawkeye nozzle control valves are designed to provide up to 500 hours maintenance free operation with proper
equipment maintenance as recommended by the equipment or chemical manufacturer. However, the seals may
become worn or swollen due to chemical compounds, chemical formulations, or high operating pressures. This
may cause accelerated wear to the sealing surfaces. The following nozzle control valve maintenance procedures
I
t
e
m
Seal Replacement Kits
Hawkeye Service ToolsTeeJet (P/N 117-1005-050)
Hypro/Arag (P/N 117-1005-051)
Wilger (P/N 117-1005-052)
TeeJ et Hypro Wi lger
1.
Fly Nut
a
321-0000-457
Hawkeye Valve Body
Removal Tool
(1/4” Drive)
2. P l u n g e r
Assembly
321-0000-459
Hawkeye Fly Nut
Wrench
3. O-Ring
4.
Valve
Body
ab
a. Appearance may vary.
b. Valve body replacements not included in seal replacement kits - sold separately.
107-1005-001 107-1005-002 107-1005-003
5.
Outlet
Seal
Flat Seal
219-1005-001M
Flat Seal
219-1005-001M
O-Ring
219-1005-002M
6.
O-Ring
(56 Pack)
Stackable
219-1005-115M
Turret
219-1005-116M
219-1005-115M 219-1005-116M
1
2
3
4
5
6
Valve Body Removal
Tool
(P/N 321-0000-457)
Fly Nut Wrench