APPENDIX
G
P/N 016-0171-584 Rev. D 115
APPE NDIX G
REMOTE DIAGNOSTICS
APPLICATION
This section provides information on the Remote Diagnostics Application (available on the Raven App store).
IntelliSpray allows the user to control the system and perform diagnostics through a personal mobile device such
as a tablet or smart phone. The user can turn on and off boom sections, turn the pump on or off, and view real-
time system information for troubleshooting or demonstration purposes without having to leave the cab. A
Bluetooth low energy (BLE) compatible device is required.
The Remote Diagnostics Application is available for download and use on any Android or iOS Bluetooth low
energy compatible device.
To use the diagnostics application:
• System speed must be 0
• The application must be connected to PC II
• The Enable Wireless Control check box must be checked in the PC II User Settings
• Master Switch and Boom Section switches must be on
NOTE: The Enable Wireless Control check box will automatically uncheck if a speed is detected.
APPLICATION SCREENS
The section provides an overview of the application screens.
To Next Page
Loading...
