CHAPTER 2
10 Hawkeye Nozzle Control Operation Manual
CARE AND USE
Always follow equipment manufacturer’s recommended maintenance procedures for storing equipment. The
following maintenance procedures are generally recommended for storing equipment with the Hawkeye nozzle
control system:
1. Empty product from the chemical supply tank and flush the application system with water.
2. Purchase a tank cleaner. Follow the manufacturer’s directions for water quantity and dilution rate.
3. Rinse the tank according the tank cleaner directions. Do not let the tank cleaner sit in the spray boom or
Hawkeye valves.
4. After rinsing with the tank cleaner, flush the spray boom and nozzles with 50 - 100 gallons of clean water.
NOTE: If applying a water-based product, flush the system with soap and water.
5. Prime the system plumbing with a 50% water and automotive antifreeze mixture to prevent freezing of
Hawkeye nozzle control valve components. Freezing will result in damage to the Hawkeye system and other
plumbing components on the system.
NOTE: Refer to Appendix D, Maintenance Schedule and Replacement Parts, for additional assistance with
maintaining the Hawkeye nozzle control valves.
UPDATES
Updates for Raven manuals as well as software updates for Raven consoles, product controllers, and valve ECU’s
are available at the Applied Technology Division web site:
www.ravenhelp.com
The Raven Service Tool (P/N 117-0171-464) and a laptop PC (Windows 7 or newer) are required to perform
software updates of the Hawkeye nozzle control system. Refer to the Raven Service Tool Operation manual for
additional assistance with updating the Hawkeye nozzle control valves or the Hawkeye (Product Controller II) ECU.
Use cable P/N 115-7303-157 for updating nozzles. Cable P/N 115-0172-230 and P/N 115-0171-368 are required to
update Hawkeye ECU.
Sign up for e-mail alerts to receive notifications when updates for your Raven products are available on the Raven
web site.
At Raven Industries, we strive to make your experience with our products as rewarding as
possible. One way to improve this experience is to provide us with feedback on this manual.
Your feedback will help shape the future of our product documentation and the overall service we
provide. We appreciate the opportunity to see ourselves as our customers see us and are eager
to gather ideas on how we have been helping or how we can do better.
To serve you best, please send an email with the following information to:
techwriting@ravenind.com
-Hawkeye Nozzle Control Operation Manual
-P/N 016-0171-584 Rev. D
-Any comments or feedback (include chapter or page numbers if applicable).
-Let us know how long have you been using this or other Raven products.
We will not share your email or any information you provide with anyone else. Your feedback is
valued and extremely important to us.
Thank you for your time.
To Next Page
Loading...
