Raven Hawkeye - Injection Wizard; 1. Turn the VT power on and allow the display to power up and initiate the ISOBUS system.; 2. Once the Sidekick Pro ICD ECU is detected, the Sidekick Pro ICD Menu button will display in the VT Menu.; 3. Press the Hawkeye Menu button.

CHAPTER 3
16 Hawkeye Nozzle Control Operation Manual
INJECTION WIZARD
1. Turn the VT power on and allow the display to power up and initiate the ISOBUS system.
NOTE: If properly connected and powered, the VT will automatically detect the Sidekick Pro ICD ECU. If the
ECU is not detected by the display terminal, troubleshoot the Sidekick ECU and restart the system.
Refer to “Troubleshooting” section on page 61 for assistance with connection issues. Contact a local
Raven dealer for additional troubleshooting assistance if the ECU is still not detected.
2. Once the Sidekick Pro ICD ECU is detected, the Sidekick Pro ICD Menu button will display in the VT Menu.
FIGURE 1. Sidekick Pro ICD Menu Button
3. Press the Hawkeye Menu button.
FIGURE 2. Hawkeye Menu Button
4. Select the Tools Menu.
FIGURE 3. Tools Menu Softkey
5. Press the Equipment Settings tab.
FIGURE 4. Equipment Settings
6. Select the Injection Wizard.
7. Locate the Sidekick Pro ICD ECU serial number. The serial number is typically located on the front or top of the
direct injection pump.
8. Assign the desired Sidekick Pro ICD ECU to the desired product channel.