Raven Hawkeye - Home Screen Navigation and Controls

CHAPTER 5
44 Hawkeye Nozzle Control Operation Manual
FIGURE 1. Home Screen
Depending upon the mode and system options, the following display areas, information prompts, and features
may be accessible via the Hawkeye home screen:
QUICK ACCESS SOFTKEYS
The quick access softkeys allows the operator to quickly access frequently used functions, calibration settings, and
status displays during operation. Review the following sections for additional information on softkey functions.
MAIN PRODUCT PUMP SWITCH
The status of the product pump is always displayed in the softkeys area. Select the
pump status indicator to toggle the main product pump on or off during field
applications.
NOTE: Both the master switch and the product pump softkey must be toggled on
to apply product. If the machine has an additional switch to open a master tank valve and/or turn on
the main product pump, ensure the machine’s switch is turned on before the on-screen softkey is
used and the master switch is toggled on to prevent pressure spikes in the system when starting
application. See the Master Switch Status section for additional assistance with the master switch
status display if available.
± BUMP
While applying in the automatic control mode, the operator
may elect to display the ± rate or pressure bump softkey in
the softkeys area. Select these softkeys to manually increase
or decrease the target rate or pressure settings by the ±
value set on the presets settings prompt.
• Softkeys Area • Rate and Pressure
Target Values
• Rate and Pressure
Gauges
•Master Switch
Status Display
• Application Mode
Selector
• Alarm Status
Display
• Volume Applied
Tally
• Area Covered Tally
•Product Select
Buttons
• Tank and Section
Status Display
• On-Screen Section
Controls
• Home Screen
Toggle
Menu Buttons
Quick Access
Softkeys
Product
Selection
Buttons
Pump
Pump Pump On
Rate Pressure
Increase
Decrease
Injection