Raven Hawkeye - Tally Registers; Using and Resetting Tally Registers

CHAPTER
6
P/N 016-0171-584 Rev. D 55
CHAPTER 6 TALLY REGISTERS
USING THE TALLY REGISTERS
To access the Hawkeye tally registers prompt:
1. Open the VT Menu and select the Hawkeye Menu button.
2. From the home screen, select the Tally Registers softkey along the right side of the display.
RESETTING A REGISTER
To reset a register:
1. Open the VT Menu and select the Hawkeye Menu button.
2. From the home screen, select the Tally Registers softkey along the right side of the display.
3. On the Totals Data tab, select the Reset button for the register to be reset.
4. Accept the confirmation prompt to reset the select register.
5. Repeat the above process to reset other tally registers as desired.
Hawkeye
Menu
Tally
Registers
VT Menu
Tally
Registers
Reset
Register
Hawkeye
Menu
VT Menu