CHAPTER 7
60 Hawkeye Nozzle Control Operation Manual
Runtime Hours. The runtime tally for each nozzle. Use this information to log the hours run and to help schedule
and track maintenance on each nozzle on the Hawkeye control system.
Flow Offset Enable (Wheel Tracks). Check this box to increase the flow rate of any two nozzles anywhere on the
boom to achieve optimal coverage in the turbulent air conditions behind vehicle wheels. The offset percentage
compared to the rest of the nozzles is set in the upper diagnostics window (Nozzle Flow Offset %). The
maximum offset is 30%.
To Next Page
Loading...
