CHAPTER 3
16ISO AutoBoom® Installation Manual for Case IH 3230, 3240, 3320, 3330, 3340, 4420, 4430, & 4440 (MY2010 & Newer)
Refer to the following table to install the fittings in the appropriate ports of the AutoBoom valve.
MOUNT THE AUTOBOOM VALVE
FIGURE 1. AutoBoom Valve Mounted on the Valve Mounting Bracket
1. Secure the UltraGlide AutoBoom valve (P/N 063-0131-124) to the mounting bracket (P/N 107-0171-802) using
four 5/16” hex bolts (P/N 311-0052-104) and four 5/16” lock washers (P/N 313-1000-019).
Fitting Part Number Port
Fitting - -6 ORFS (M) to -8 SAE O-Ring (M) 90° Elbow 333-0012-165
LF CYL RTN,
R T C Y L R T N
Fitting - -6 ORFS (M) to -6 SAE O-Ring (M) Straight Adapter 333-0012-084 LC, RC
Fitting - -8 ORFS (M) to -8 SAE O-Ring (M) Straight Adapter 333-0012-168 P, T
Fitting - -6 Hex 9/16” O-Ring Plug 333-0012-194 LV, RV
To Next Page
Loading...